Marvel Ecodrain

HomeMarvel Ecodrain

Project Description



Marvel Ecodrain uPVC Pipes and uPVC Fittings are manufactured in state of the art manufacturing facilities using Lead Free uPVC compound. Lead is a harmful environmental pollutant. Marvel, for the first time in Nepal, has taken the initiation to introduce a lead free based uPVC plumbing system towards its attempt in reducing environmental burden in the country.

The state-of-the-art manufacturing facilities & best quality material used to produce Marvel uPVC Piping system, adds to the strength and durability, that is unmatched by any other system available in the market. The smooth surface of the Marvel uPVC system provides a choke-free system with almost no maintenance cost.

Again for the first time, sealing rings have been sourced from BODE, Germany. These German BIP SEAL rings ensure:

• Suitable for automatic assembly as they are pre-lubricated
• Low insertion force
• Reliable function under extreme conditions
• Vacuum-tight
• Long life time according to EU BPR 89/106/EEC

Marvel Ecodrain uPVC Pipes & fittings are manufactured in both grooved socket (“O” Ring type) and Sliding Socket type. Pipes are manufactured with two different classes as “TYPE A” & “TYPE B”.

Grooved Socket pipes & fittings are socketed on automatic socketing machine with high degree of accuracy. The socket has groove inside for rubber ring. Rubber Lubricant should be applied on the rubber ring for ease and good jointing. The rubber ring ensures trouble free water tight joint with allowance to thermal expansion /contraction. Solvent cement should not be used on grooved sockets provided with sealing rings as they deteriorate the rings and render the system subject to leakages. Sliding Socket pipes are socketed on automatic socketing machine with high degree of accuracy. Such pipes are to be joined with solvent cement. The pipes when joined using solvent cement form a permanent water tight joint. Please use Marvel brand solvent cement to ensure leak proof joints.

SIZES OF uPVC PIPES: 75mm, 110mm, 160mm in Type A & Type B as per IS : 13592
SIZES OF uPVC FITTINGS: 75mm & 110mm as per IS : 14735

• Reduced environmental burden as made up of Lead Free Compound
• Chemical and corrosion resistance
• Excellent tensile & impact strength
• UV & Fire resistant
• Easy to assemble & repair
• Light in weight
• Cost effective
• Easy to install and longer Life

This system can be used in sanitary drain, waste, vent, sewer, drainage applications. This system is intended for use in non-pressure applications where the operating temperature will not exceed 140o°F.

TYPE A pipes are recommended for use in ventilation pipe work, rainwater and rain water harvesting applications.
TYPE B pipes are recommended for use in soil and waste discharge systems.